PRESSURE TRANSMITTERS

Pressure monitoring

Wetted parts are all made of stainless steel for high resistance to chemicals
Stainless steel diaphragm welded with casing
No seals and thus low leakage rate even with difficult gases
High overpressure safety especially suitable for use in hydraulic systems
Long working life even with high rates of pressure cycles
Flexible voltage supply and current or voltage output signal for your control electronics
High accuracy (0.5 % full scale) and reliability for secure process monitoring
Very small size for compact subassemblies
IP67 with robust connections for reliable wiring
datasheet
in pdf-format

	0605	0610	0620
Output signal:	0.5 - 4.5 V ratiometrically	0 - 10 V (3-wire)	4 - 20 mA (2-wire)
Supply voltage U_b:	5 VDC +/- 10%	10 – 32 VDC	12 – 32 VDC
Maximum load:	≥4.7 kΩ		≤ (U_b – 12 V) / 20 mA
Current consumption (without load):	≤10 mA	≤15 mA	-
Pressure ranges_{p_range}:	-1 – 0 bar; 0 – 10 bar; 0 – 100 bar; 0 –250 bar; 0 – 600 bar; 0 – 1000 bar; -14.5 – 0 PSI; 0 – 145 PSI; 0 – 1450 PSI; 0 – 3625 PSI; 0 – 8700 PSI; 0 – 14500 PSI
Accuracy:	±0,5% FS at room temperature
Response time (10 – 90 %):	max. 2 ms
Temperature range:	-40°C - +125°C -40 °F – +257 °F	-40°C - +105°C -40 °F – +221 °F	-40°C - +100°C -40 °F – +212 °F
Temperature drift:	approx. ±0,2% / 10 K
Mechanical life expectancy:	10⁷ pulses up to nominal p_range
Overpressure safety ¹⁾:	2 x p_range up to 350 bar; 1.5 x p_range up to 600 bar 2 x p_range up to 5100 PSI; 1.5 x p_range up to 8700 PSI
Bursting pressure ¹⁾:	3 x p_range up to 350 bar; 2 x p_range up to 600 bar 3 x p_range up to 5100 PSI; 2 x p_range up to 8700 PSI
Materials:	body material: 1.4301 diaphragm: 1.4301 (<500 bar / 7250 PSI); 1.4542 (>500 bar / 7250 PSI)
Reverse polarity protection:	built in
Protection according to DIN EN 60 529:	IP67 for M12x1 and DIN 72585; IP65 for AMP and DIN EN 175301-803 (DIN 43650)
Weight:	approx. 100 g (DIN EN 175301 approx. 120 g)
Vibration resistance:	20 g at 4 – 2000 Hz sine
Max. length of connection cable:	30 m / 100 ft
EMC Standards:	DIN EN 61000-6-2, DIN EN 61000-6-3